Do you know anything about wind vane and anemometer ?

The Wind vane and anemometer are the most popular detectors used by meteorologists to observe weather conditions. Wind speed and direction can provide important clues about the weather and can even play a role in predicting future conditions. For example, in the Northern Hemisphere, south winds usually bring warm air, while north winds usually bring cool air. These winds blow at different speeds. Under the influence of high pressure systems, winds are usually lighter, while low pressure usually brings more gusts.

This wind speed sensor shell is made of high-quality aluminum alloy profiles, and the exterior is electroplated and sprayed. It has good anti-corrosion and anti-corrosion characteristics, which can ensure the long-term use of the transmitter without corrosion.

We use wind vane and anemometer to observe the speed and position of the wind. Tracking the wind and subsequent weather conditions can help you predict what’s coming. We can use the weather vane and anemometer independently developed by JXCT for online monitoring.

Wind direction sensor

Wind direction detector is used to measure wind direction, accurate measurement, stable base, low friction, black shield wire, high quality aviation plug, direct sales from manufacturers, support customization.

BAUD RATE: 2400/4800/9600
OUTPUT SIGNAL: RS485/0-5V/0-10V/4-20mA

Climate monitor-Wind speed sensor

The wind speed sensor can be used to monitor the wind speed in the environment, accurate measurement, three-cup wind speed measurement, direct sales by the manufacturer and support for customization.

Diameter of rain bearing:φ160mm
Measuring range:≤30mm/min
Texture of material:high quality ABS
Resolving power:0.2mm
response time:<2S
Power consumption:<1W
Operating temperature:-30-80°C
Power supply:12- 24V DC

Wind direction sensor problem

The wind vane is not flexible and stuck
IWe had intermittent readings with the wind vane and anemometer. That’s when you need to check your wiring. In most cases, this is caused by poor contact between your device and the collection device. Technologists call this a “signal open circuit.”

We use electricity to test the accuracy of the wind direction sensor. If we use the wind direction sensor and find it is not sensitive, we need to replace the sensor or contact the manufacturer for processing. If you are not an expert on wind direction sensors, do not remove the sensors at will.If your wind direction sensor is not flexible or stuck for a long time, it may be due to long-term maintenance and cleaning, resulting in serious aging or wear of internal components. You need to replace the sensor component or disassemble the sensor for internal cleaning.

Intermittent wind direction reading

The wind direction sensor has the problem of intermittent reading when it is put into use. That’s when you need to check your wiring. In most cases, this is caused by poor contact between your device and the collection device. Technologists call this a “signal open circuit.”

The wind direction is zero

Some users encounter this problem the first time they use the wind direction sensor. Sensors, connecting to the network numerical always display to zero. When this problem occurs, manually close the wind vane of the wind direction sensor. If the value changes, you have placed the vane in the same direction as the current wind direction. The reading is the current displayed wind direction value. If the wind direction value is still zero during rotation, check the cable and power supply system to troubleshoot wiring problems and no power supply problems. If the above problems do not exist, it indicates that there may be a problem with the internal sensor module, we need to replace it in time.

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart