Do you know how to choose a weather station?

Choosing the correct address is the most important step in the weather station installation project , Because it determines the accuracy of the measurement data.The weather station should be installed as far as possible on the open ground without any obstructions, or 10 feet above the top of the surrounding buildings.

When choosing the location of the product, you need to consider its impact on wind speed and direction sensors, temperature and humidity sensors, solar radiation sensors, rain gauges, rain and snow sensors, etc. If there are obstructions around and close to the product, it will affect the measurement of wind speed and direction. If the product is installed under a tree or there is an obstruction on top of it, your rainfall measurement will be biased. If the bottom is not installed flat, the overall weather station tilt will also affect the measurement accuracy.

The best place to put the weather station sensors

1. Temperature and humidity sensor

The temperature and humidity sensor should be installed at 10 feet from the ground as the best measurement position. There are no obstructions or heat-dissipating objects around it, and there is no shadow for 24 hours a day. The surface of the support plate where the temperature and humidity sensor is installed should be rough, not reflective, and not dark. Clean the sensor housing once a year in a normal environment, and clean the housing once every three months in high sandy areas to reduce measurement errors.

Wind speed and direction sensor

If there is no obstruction within a radius of 330 feet around the weather station, it can be installed on a pole 10 feet above the ground. If there are buildings or shelters around, they should be installed at a height of 10 feet from the top of the tallest surrounding building. The purpose is to reduce the influence of surrounding buildings on wind speed and direction.

Rain gauge installation

The rain gauge should be installed at a height of 10 feet from the ground with no obstructions around and on the top. When installing, make sure that the rain gauge stands perpendicular to the beam and the beam is parallel to the ground. As we all know, if the rain gauge is tilted, the measurement will occur error. The rain gauge should be cleaned as regularly as possible. In windy weather, leaves and sand are prone to fall into the funnel and block the leak.

Rain and snow sensor

The rain and snow sensor can be installed on a beam 10 feet above the ground to ensure that there is no obstruction on the top. Install the sensor at an angle of 15° to help water or snow slip off. If there is icing on the top, the sensor can melt the ice into the water through the automatic heating function to make it fall, so as not to affect its winter use.

Soil sensor

There are two ways to install the soil sensor: one is to insert the probe of the soil sensor vertically into the soil (the depth should be ≥7cm), avoiding rocks and hard objects. The other is to dig a 20cm deep soil pit, insert the soil sensor probe horizontally into the pit and fill it with compaction.

Choose a Most Suitable Weather Station is very important for you, right?

1. Professional weather station

A professional weather station is a complete and accurate weather station measurement system, which can accurately measure more than 20 environmental factors such as oxygen ions, evaporation, light, solar radiation, and ultraviolet rays. And can record and upload monitoring data in real-time. The monitoring data of this kind of weather station is accurate and reliable, and it is especially suitable for agricultural, environmental, and animal husbandry, and other industries.

2. Portable weather station

The portable meteorological station is an automatic home weather monitoring. Compared with professional weather stations, it can measure 7 common weather elements. The portable weather station is simple to install, occupies a small space, and has a stable signal. It is very suitable for installation on the top of buildings, rugged mountains, or small courtyards to monitor environmental data.

3. Ultrasonic weather station

The ultrasonic weather station is a new type of international product. Its appearance design is simple and compact, simple installation, exquisite appearance, IP68 protection level can effectively resist rain, snow, and ultraviolet rays. The common ones are traffic weather stations, mine weather stations, and marine weather station for boats.

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart