Soil pH sensor is a soil detection instrument used to detect the current pH value of soil. It detects soil pH by inserting two stainless steel probes vertically into the soil. We offer RS485, 0-5V, 0-10V and 4-20mA soil pH sensors. The sensor can be used in conjunction with our soil data logger.
description
Soil ph refers to the current pH of the soil, which plays an important role in the growth of plants. Plants can grow normally in a wide range, but various plants have their suitable pH. Reasonable control of the soil pH value is conducive to the healthy growth of crops.
JXCT soil PH sensor is a sensor developed by our company. The soil sensor has high accuracy, fast measurement speed, stable output, and can be widely used in various soils. The sensor shell adopts vacuum potting, IP68 protection grade, can be buried in the soil for a long time, can withstand long-term electrolysis and corrosion.
1, The JXCT soil pH sensor is simple to use, has few operating steps, does not need to add reagents, and does not limit the number of detections.
2, The measurement accuracy of the sensor is high, up to ±0.3PH accuracy, and the response speed is very fast.
3, The electrode is made of specially treated alloy material, which can withstand strong external impact and is not easy to damage.
4, The sensor shell is completely sealed, resistant to acid and alkali corrosion, and can be buried in the soil for long-term dynamic detection.
5, The probe plug-in design ensures accurate measurement and reliable performance.
6, You can check the data through the free cloud platform offered by us.
How to use a soil pH sensor?
When using it for the first time, you need to plug it in the soil several times to remove the oxide film on the surface of the probe. Then insert the probe vertically into the soil, which requires avoiding rocks. Besides, you can manually dig a pit in the ground, then insert the sensor horizontally into the pit wall and bury the map.
Measuring area of soil pH sensor
The measurement area is a cylinder with a diameter of 5 cm and the same height as the probe with the center of the two probes as the center. As the picture shows:
Measuring area:
φ=5cm, cylinder with the same height as the probe
Precautions for using this soil sensor
1, All probes must be inserted into the soil during measurement.
2, Pay attention to lightning protection when used in the field.
3, Do not bend the probe violently, pull the lead wire of the sensor forcefully, and do not hit or hit the sensor violently.
4, The sensor’s protection grade is IP68, and the sensor can be soaked in water.
5, Due to the presence of radiofrequency electromagnetic radiation in the air, it is not suitable to stay energized in the air for a long time.